IoT Products

Cellcomm has a well-equipped manufacturing facility supported by competent R&D, design and QC Team. Company has established relationships with major OEMs and system integrators and holds approved supplier status with most of them.

Data Acquisition Gateways and Data Loggers

The Gateways is an intelligent modem and that can be integrated with a wide variety of devices. This allows your machines to communicate with your IT back-end system or mobile phone remotely. This small and efficient package is loaded with sophisticated M2M technology. It provides versatile interfaces and advanced functions which can be integrated as a part of your application devices.

CSL12xx Series – GSM/GPRS Gateway

  • Quad-Band GSM 850/900/1800/ 1900 MHz
  • Flash Memory – 8MB
  • Security / Protection – Security authentication by software
  • Internet services – TCP, HTTP, FTP, SMTP, MQTT, JSON
  • Clock – Built-in Real time clock with battery backup
  • RS232 Interface
  • 2 wire RS485 / LAN interface 10/100Mbps
  • GPIO Interface: 6 ch DI, 4 ch DO, 1 ch AI

CSL13xx Series – GSM/GPRS Gateway

  • Quad-Band GSM 850/900/1800/ 1900 MHz
  • Flash Memory: 1.7MB
  • RS 232 serial interface
  • RS 485 serial interface
  • GPIO Interface: 4 ch DI, 4 ch DO, 2 ch AI
  • RTC with battery backup
  • Supply Voltage 9-24VDC

CSL15xx Series – Battery operated GSM/GPRS Gateway

  • Quad-Band GSM 850/900/1800/ 1900 MHz
  • Flash Memory: 1.7MB
  • RAM 1MB
  • RS 232 serial interface
  • GPIO Interface: 1 ch DI, 2 ch AI
  • RTC with battery backup
  • Supply Voltage 9-24VDC

CSL15xx D-Series – Battery Powered Datalogger

  • Ruggedized, explosion proof enclosure
  • Built-in pressure sensor
  • Built in GSM modem for server communication
  • Analog and pulse inputs
  • Built in SD card for storage
  • Optimized power management algorithm for extended battery life
  • Switchable excitation power for external sensors
  • Ideal for AMR applications

CSL1600 Data Logger

  • GSM/GPRS Band – Quad-Band GSM 850/900/1800/ 1900 MHz, 4G LTE
  • Flash Memory – 8MB
  • Security / Protection – Security authentication by software
  • Internet services – TCP, HTTP, FTP, SMTP, MQTT, JSON
  • Clock – Built-in Real time clock with battery backup
  • LCD display: 20X4 Character
  • Keypad for configuration and controlling
  • Serial data RS232, 2wire RS485 Half Duplex
  • LAN interface 10/100Mbps
  • GPIO Interface: 16 ch DI, 4 ch DO, 20 ch AI

CSL16xx Series – IoT Gateway

  • GSM/GPRS Band – Quad-Band GSM 850/900/1800/ 1900 MHz, 4G LTE
  • Optional Dual SIM Facility for GSM/GPRS
  • Flash Memory – 8MB
  • Security / Protection – Security authentication by software
  • Internet services – TCP, HTTP, FTP, SMTP, MQTT, JSON
  • Clock – Built-in Real time clock with battery backup
  • Serial data RS232, 2wire RS485 Half Duplex
  • LAN interface 10/100Mbps
  • GPIO Interface: 6 ch DI, 4 ch DO, 6 ch AI

CSL16xx D-Series – Data Logger GSM/GPRS Gateway

  • GSM/GPRS Band – Quad-Band GSM 850/900/1800/ 1900 MHz, 4G LTE
  • Flash Memory – 8MB
  • Security / Protection – Security authentication by software
  • Internet services – TCP, HTTP, FTP, SMTP, MQTT, JOSN
  • Clock – Built-in Real time clock with battery backup
  • LCD display: 20X4 Character
  • Serial data RS232, 2wire RS485 Half Duplex
  • LAN interface 10/100Mbps
  • GPIO Interface: 6 ch DI, 4 ch DO, 6 ch AI
  • IP65 Enclosure

CSL82xx Series – Data Logger GSM/GPRS Gateway

  • GSM/GPRS Band – Quad-Band GSM 850/900/1800/ 1900 MHz, 4G LTE
  • Flash Memory – 8MB
  • Security / Protection – Security authentication by software
  • Internet services – TCP, HTTP, FTP, SMTP, MQTT, JOSN
  • Clock – Built-in Real time clock with battery backup
  • LCD display: 20X4 Character
  • Keypad for configuration and controlling
  • Serial data RS232, 2wire RS485 Half Duplex
  • LAN interface 10/100Mbps
  • GPIO Interface: 16 ch DI, 4 ch DO, 20 ch AI

Cellcomm Short Range Wireless terminals use subGHz license free band to communicate up to 1500 meters by line of sight. Short range wireless Terminals supports point to point network, Star network, Tree and Mesh network topologies and can communicate up to a speed of 250 kbps. Short range wireless terminals are used for Serial data bridging and Sensor Networking

CSL22XX Series

The CSL22 RF Terminals are wireless transceiver designed for license-free operation in the 865MHz band and it sustain a standard asynchronous serial data stream between two or more wireless terminals.
This terminal is equipped to replace thousands of meters of serial cable with its wireless link.

  • Frequency Band: 865MHz to 867MHz License Free Band
  • RS232 Interface
  • 2 Wire RS485 Interface
  • Topology Supports: Point-to-Point, Point-to-Multipoint / Mesh network
  • Housed in a compact and rugged aluminum enclosure

Media Converter is a simple networking device that makes it possible to connect two dissimilar media

CSL4111 – Serial to Ethernet Transparent Converter

  • RS232 serial interface / 2 wire RS485 interface
  • LAN Interface 10/100 Mbps
  • Isolation: 1.5KVDC isolation on data and Power
  • Input Supply: 9-24VDC

CSL4112 – Modbus RTU to Modbus TCP/IP Gateway

  • RS232 serial interface / 2 wire RS485 interface
  • LAN Interface 10/100 Mbps
  • Isolation: 1.5KVDC isolation on data and Power
  • Input Supply: 9-24VDC

CSL4113 – Modbus RTU to Modbus TCP/IP Gateway

  • 2 channel 2 wire RS485 interface
  • LAN Interface: 10/100 Mbps
  • Isolation: 1.5KVDC isolation on data and Power
  • Internal Surge Protection 400KVA
  • Input Supply: 9-24VDC

CSL4115 – Modbus to Profibus Gateway

  • ABS plastic, DIN rail mounted enclosure
  • User-friendly web based GUI for configuration
  • Integrates Modbus RTU/TCP devices into PROFIBUS DP network
  • Extremely space-saving compact design
  • Communicates up to 120 Modbus devices to Profibus

CSL42xx – USB to RS485 Converter

  • 2 wire RS485 interface
  • USB interface for data communication
  • Isolation: 1.5KVDC isolation on data and Power
  • USB powered

CSL4200 – RS232 to RS485 converter

  • RS232 serial interface
  • 2 wire RS485 interface
  • Isolation: 1.5KVDC isolation on data and Power
  • Input Supply: 9-24VDC

Automatic rain gauge Solar powered CSL-ARG-02

The automatic rain gauge is a rugged and durable weather instrument for monitoring rainfall rate and total rainfall of the day. Rain collected in its catchment funnel is measured by tipping bucket mechanism inside the rain gauge. A magnetic reed switch which detects each tip and send signal to the datalogger where every tip is counted and stored. The rain gauge is fitted with built in datalogger capable of sending rainfall data to the central server through its 4G cellular modem over GSM/GRPS service. The unit is fully works on solar power. Logging and data transmission intervals can be set by the user as per the requirement. An OLED display on the logger will show present reading and few past data as well. The logger sends device health information to the server along with the rainfall data, which helps to indicate device parameter at the monitoring station.

Applications

  • Agricultural
  • Meteorological
  • Disaster management
  • Hydrology

Features

  • Built-in GPS receiver and GPRS/4G modem
  • Works on Built-in rechargeable battery
  • Long battery life
  • Rugged and durable suitable for harsh environments
  • Easy device configuration
  • Local display for live view

Tipping bucket rain gaugeCSL 6201 / 6202

The automatic rain gauge is a rugged and durable weather instrument for monitoring rainfall rate and total rainfall of the day. Rain collected in its catchment funnel is measured by tipping bucket mechanism inside the rain gauge. A magnetic reed switch which detects each tip and send signal to the datalogger where every tip is counted and stored. The rain gauge is fitted with built in datalogger capable of sending rainfall data to the central server through its 4G cellular modem over GSM/GRPS service. The unit is fully works on solar power. Logging and data transmission intervals can be set by the user as per the requirement. An OLED display on the logger will show present reading and few past data as well. The logger sends device health information to the server along with the rainfall data, which helps to indicate device parameter at the monitoring station.

CSL 6201 / 6202

  • Orifice diameter: 200mm Knife edge collector rim
  • Collector area: 314 CM2
  • Capacity: Unlimited
  • Operating temperature range: 0oC ~ +60oC
    -30oC~ +60oC(with heater*)

CSL6201_Tipping-bucket-rain-gauge_V1 Datasheet

CSL 6211 / 6212

  • Orifice diameter : 9.6 inch Knife edge collector rim
  • Collector area : 466 CM2
  • Capacity : Unlimited
  • Operating temperature range: 0oC ~ +60oC
    -30oC~ +60oC(with heater*)

CSL6211_Tipping-bucket-rain-gauge_V0 Datasheet

Solar charge controller MPPT

The CSL 7001 series is an economic solution for preventing battery overcharging in low-power systems. It is simple, compact and easy to use and install

Features

  • Designed and made in India
  • MPPT Charging
  • Auto Recognition (12V/24V)
  • >95% Efficient Power Conversion
  • Lithium Charging Compatible
  • Compact Form Factor

CSL7001_Solar-charge-controller_MPP Data sheet

CSL PV 150W

Cellcomm 150 watt solar panel is made of A grade black silicon cells to generate electricity from sun. The cells are made of superior quality silicon which gives higher efficiency.It is the latest panels in mono crystalline technology that comes with 25 years warranty.

Features

  • Best in Class Efficiency
  • Enhanced Performance warranty
  • Aesthetic Roof
  • Outstanding durability
  • 25 years performance warranty
  • Ip68 rated junction

Solar-panel-CSL-PV-150W datasheet


THREE PHASE NET METER CLOUD CONNECTED

Features

  • WAN – HAN upgradable
  • Programmable TOU/TOD
  • Anti-tamper and tamper alerts by instant push
  • End to end DLMS complaint (IS 14697, IS 15959)
  • Import and export measurements
  • Net energy measurement
  • Real-time interoperable for technology swap (GPRS, RF, PLC, loT, WiFi, BLE)

THREE PHASE SMART ENERGY METER WITH DISCONNECT AND RECONNECT

Features

  • Smart AMI with Programmable Post/Pre-payment and Net metering modes
  • Real-time interoperable for technology swap (GPRS, RF, PLC, loT, WiFi, BLE)
  • End to end DLMS complaint (IS 16444 / IS 15959 Part II)
  • Multi-vendor inter-operable communication with self-integrable capability
  • Anti-tamper and tamper alerts by event push
  • Last gasp and first breath capable
  • Programmable TOU/TOD
  • WAN – HAN upgradable
  • UC1 load switch with configurable demand and peak load

SINGLE PHASE SMART ENERGY METER WITH DISCONNECT AND RECONNECT

Features

  • Anti-tamper and tamper alerts by instant push
  • End to end DLMS complaint complies IS 16444/IS 15959 Part II
  • Multi-vendor inter operable communication with self-integrable capability
  • Programmable TOU/TOD
  • Real-time interoperable for technology swap (GPRS,RF,PLC,loT,WiFi,BLE)
  • Smart AMI with Programmable Post / Pre-payment and Net metering Modes
  • UC1 load switch with configurable demand and peak load
  • WAN – HAN upgradable

CSL3202A Field ADIO Module

Combination of discreate Input and output module for analog and digital signal to extending the no. of physical channels.

  • 4 channel Analog interfaces (4-20mA or 0-5V)
  • 4 Channel Digital Interfaces potential free
  • 2 channel Digital output
  • RS232 interface / RS485 interfaces
  • Modbus RTU slave

CSL5101 GSM Modem

  • GSM/GPRS Band – Quad-Band GSM 850/900/1800/ 1900 MHz,
  • Interface: RS232 Serial Interface with standard DB9 connector
  • Modem supports standard AT Commands
  • Input Supply: 9-24VDC

CSL9002 RS485 Isolator Repeater

  • Interface: 2 wire RS485 interface
  • Isolation: 1.5KVDC isolation on data and Power
  • Input Supply: 9-24VDC